Product images and technical information could deviate and may not be available in your country.
The required number of lanes along the 650 mm, patented starter belt is freely selectable, and the individual lanes can be switched in any sequence and at independent start intervals – each at speeds between 6 - 60 m/minute.
The transfer speed for a batch of packs and the output speed per packaging lane are continuously variable. With a defined time delay, the Bizerba LCE is even able to safely transport batches of packs that are longer than the actual converger belt to their intended destination.
Height dimensions may vary depending on transport height and version (mobile). Frame heights can be adapted for a project
Version
stainless steel
Number of lanes
1 - 6
Variable lane width
65-560 mm (version length 1900 mm), 65-425 mm (version length 1580 mm)
Package size
min. L 80 mm x W 65 mm x H 5 mm, max. L 650 mm x W 425 mm (B 560 mm) x H 140 mm
Dimensions
LCE 1900: L 1900 mm x W 790 mm x H 750-925 mm (optionally 880-1055 mm)
LCE 1580: L 1580 mm W 790 mm H 750-925 mm (optionally 880- 1055 mm)
Infeed height
750-925 mm (optionally 880-1055 mm)
By means of a crank handle the infeed height can be easily adjusted by up to 100 mm.
(optional height adjustment swivel-mounted). This option should be ordered if applied after thermo-form packaging machine as the discharge height varies for each product!
Belt speeds
Starter belt 6-60 m/min (two speed rates can be set respectively for acceptance and transportation)
Alignment belt 10-80 m/min
Package weight (max.)
7.5 kg/ 2-lane*, 5 kg/ 3-lane, 3.5 kg/ 4-lane, 2.5 kg/ 6-lane
*The weight always refers to one lane.
Control
Microcontroller
Operation
Touch display, monochrome
Protection type
IP 54
Compressed air supply is required, 6 bar
We look forward to your request.
