Line converger LCE

Optimizes package handling in material flow systems

By channeling up to 6 product lanes into a single line the LCE allows controlled product feeding from the packaging machine to the price labeler.
Due to specially formed and Teflon-coated alignment rails the converger belt proves its effectiveness especially for flat packages. It can be infinitely adjusted from 10 - 80 m/minute and individually set for each PLU.

Area of Use

  • Package handling in material flow systems, incl. weighing and price labeling


  • Quick belt change
  • Intuitive and easy to work with touch display
  • Easy-to-clean housing
  • High-quality materials

Product images and technical information could deviate and may not be available in your country.

Request a quote

Do you need more information or would you like to request a quote?


We look forward to your request.


Request a quote

The required number of lanes along the 650 mm, patented starter belt is freely selectable, and the individual lanes can be switched in any sequence and at independent start intervals – each at speeds between 6 - 60 m/minute.


The transfer speed for a batch of packs and the output speed per packaging lane are continuously variable. With a defined time delay, the Bizerba LCE is even able to safely transport batches of packs that are longer than the actual converger belt to their intended destination.

  • Rotary station for turning packages by 90°
  • Connection of a buffer belt and mobile version of the Bizerba LCE

Height dimensions may vary depending on transport height and version (mobile). Frame heights can be adapted for a project


stainless steel


Number of lanes

1 - 6


Variable lane width

65-560 mm (version length 1900 mm), 65-425 mm (version length 1580 mm)


Package size

min. L 80 mm x W 65 mm x H 5 mm, max. L 650 mm x W 425 mm (B 560 mm) x H 140 mm



LCE 1900: L 1900 mm x W 790 mm x H 750-925 mm (optionally 880-1055 mm)

LCE 1580: L 1580 mm W 790 mm H 750-925 mm (optionally 880- 1055 mm)


Infeed height

750-925 mm (optionally 880-1055 mm)

By means of a crank handle the infeed height can be easily adjusted by up to 100 mm.

(optional height adjustment swivel-mounted). This option should be ordered if applied after thermo-form packaging machine as the discharge height varies for each product!



Belt speeds

Starter belt 6-60 m/min (two speed rates can be set respectively for acceptance and transportation)

Alignment belt 10-80 m/min


Package weight (max.)

7.5 kg/ 2-lane*, 5 kg/ 3-lane, 3.5 kg/ 4-lane, 2.5 kg/ 6-lane

*The weight always refers to one lane.






Touch display, monochrome


Protection type

IP 54


Compressed air supply is required, 6 bar

Matching products