Multi point load receptor in extra flat design plus
arrow left arrow right
Multi point load receptor in extra flat design plus

Quote request

Load receptor iL Professional 2000/4000/6000/7500 F/MP

Multi point load receptor in extra flat design

The simple and robust structure of the electromechanical load receptors guarantees low maintenance and wear-resistant operation with a high level of long-term precision. The load receptors of the iL Professional F/MP series can be optionally used: built-in or freestanding, s/s lacquered deep black or made of s/s. Perfectly suitable for many applications.
Despite the large number of options that the modular component system affords, all load carriers are available as standard products.

Area of Use

  • Load receptor with different load cell type as single or dual interval scale or dual range scale for weighing ranges of from 300 kg to 6000 kg, for dry and wet areas in the warehouse, goods receiving and production
  • in combination with Bizerba weighing terminals it can be used for counting, dosing, formulation, checking and commissioning
  • for hazardous areas classified as zones 1/21 and 2/22 (optional)

Highlights

  • Load cell protection: IP67 / IP68
  • Load receptor with load cells in EEx ib-design also approved for the Ex-area in zone 1
  • Low overall height of weighing platform, 85 mm to 128 mm
  • Modular components for your perfectly customized load receptor

Product images and technical information could deviate and may not be available in your country.

With load cells in EEx ib-design also approved for the Ex-area in zone 1.

 

Load platter available in the following versions:

  • For lifting, 1- or 2-part, support via gas pressurized spring (2000/4000 F/MP)
  • For lifting up
  • For lifting up, two-sectional (2000/4000 F/MP)
  • For lifting up, three-sectional (6000 F/MP)
  • Load platter in checkered plate

Welded pit frame including pit support plate in V2A; painted welded version not for Ex applications

Weighing range
kg 		Scale interval
kg 		iL Professional 2000F/MP iL Professional 4000F/MP
300 0.1 x
600 0.2 x
1500 0.5 x
600/1500 0.2/0.5 (2x3000e, dual range) x
300/600 0.1/0.2 (2x3000e, dual scale interval) x
600/1500 0.2/0.5 (2x3000e, dual scale interval) x
1500 0.5 x
3000 1.0 x
1500/3000 0.5/1.0 (2x3000e, dual range) x
600 0.2 x
600/1500 0.2/0.5 (2x3000e, dual scale interval) x
1500/3000 0.5/1.0 (2x3000e, dual scale interval) x
Weighing range kg Scale interval kg iL Professional 6000F/MP iL Professional 7500F/MP
1500 0.5 x
3000 1.0 x
1500/3000 0.5/1.0 (2x3000e, dual scale interval) x
1500 0.5 x
3000 1.0 x
6000 2.0 x
1500/3000 0.5/1.0 (2x3000e, dual scale interval) x
3000/6000 1.0/2.0 (2x3000e, dual scale interval) x

Mounting method

  • Free-standing w/o ramp, incl. 2 fixing plates
  • Free-standing with 1 ramp, incl. 3 fixing plates (iL 2000/4000F/MP)
  • Free-standing with 2 ramps, incl. 4 fixing plates (iL 2000/4000F/MP)
  • Built-in, incl. 4 corner plates

Materials

  • Types 2000/4000F/MP:
    • Load frame: steel painted, stainless steel V2A, stainless steel V2A E-polish, stainless steel V4A
    • Load platter: steel painted, V2A, V2A E-polish, V2A checkered plate, V4A
    • Drive-on ramps, incl. fixing plates:
      • lacquered (not for Ex applications); V2A; V2A, e-polished; V4A
      • checkered plate, V2A; checkered plate, V2A, e-polished
  • Type 6000F/MP:
    • Load frame: stainless steel V2A
    • Load platter: V2A, V2A checkered plate
  • Type 7500 F/MP:
    • Load frame: lacquered, hot-dip galvanized steel, stainless steel V2A
    • Load platter: lacquered, hot-dip galvanized steel, stainless steel V2A;
    • All variants also available with checkered plate
  • Please, note: for the e-polish and V4A variants, all DIN and small parts (screws, bolts, bearings) are always made of V2A.

Protection class according to DIN 40050

  • Load cells and cable junction boxes (compound filled): IP68

Load cells optional

  • HLC – load cells for 3000e or 2x3000e as 2-range scale
  • SB4 – load cells for 3000e or 2x3000e as 2-partition scale
  • Strain gauge shear beam

Design loads according to DIN 8119-4

iL Professional 2000F/MP
(load capacity 2000 kg)
Design load R1 (kg) Design load R2
(kg) 		Design load R3
(kg) 		Wheel load /axle load (kg)
HLC, nominal load 550 kg 2000 1400 950 300/ 600
SB4, nominal load 510 kg 1800 1400 950 300/ 600
iL Professional 4000F/MP
(load capacity 4000 kg)
HLC, nominal load 1100 kg 4000 2800 2000 600/ 1200
SB4, nominal load 1020 kg 3600 2800 2000 600/ 1200
iL Professional 6000F/MP
(load capacity 6000 kg)
SB4, nominal load 2040 kg 6000 4500 3000 1000/2000
SB4, nominal load 1020 kg 3600 2800 2000 750/ 1500
iL Professional 7500F/MP
(load capacity 7500 kg)
Strain gauge shear beam 7500 6000 4000 2000/ 4000

Do you need more information or would you like to request a quote?

 

We look forward to your request.

/

I hereby agree that Bizerba SE & Co. KG is allowed to use, in particular store and transfer to the extent as mentioned below, all contact information details (in particular name, company name, address, e-mail address) for communication in connection therewith until I exercise my right of withdrawal.

We take the protection of your personal data very seriously. This also includes the storage and processing as well as the transfer of personal data. Please, also see our data privacy statement. Any other use of your personal data, requests or other information or the transfer to third parties other than mentioned in this policy will only be made with your prior consent. Personal data will only be disclosed for the purpose of forwarding inquiries to relevant places and areas of our affiliated companies or sales partners of the Bizerba SE & Co. KG, as part of order data processing to service providers, by virtue of statutory provisions or within the framework of authorities entitled to receive information as required by law.

Matching products