X-ray inspection system XRE-D

The end-of-line inspection system offers maximum safety: By using X-ray technology the XRE-D detects contaminated, damaged and defective products and packagings. Besides metallic and non-metallic foreign objects it detects missing, defective or misshaped products as well as overweight or underweight. Thanks to an efficient quick conveyor belt change system the belt can be changed within two minutes.

Inspection system XRE-D detects foreign objects based on density differences as compared to the product to be inspected. The different absorption of X-rays allows to detect contaminations. Besides metal, glass, ceramics, stones and raw bones the system also detects PVC, Teflon, rubber and glass fiber reinforced plastics. Even in aluminum-packaged products the XRE-D finds non-magnetic stainless steels and non-ferrous metals. The system reliably checks completeness of closed packagings and can thereby optionally hide elements such as aluminum clips.

Area of Use

  • Contaminant detection
  • Counting of products
  • Completeness check
  • Detection of defective/misshaped products
  • Inspection of multiple lines
  • Inspection of products with variable density ranges

Highlights

  • Safe detection of metallic and non-metallic foreign objects in the entire inspection area: No dead angle even in case of tall products
  • Reliable detection of missing, broken or misshaped products
  • Weight control of products or product components
  • Chaotic product feed via multi-product software
  • Synchronous inspection of up to four parallel running production lines
  • Highest search sensitivity with zone analyzer software: Free zone selection within the X-ray image
  • Easy and intuitive operation
  • Conform with BRC, M&S, IFS and HACCP
  • Real time check of up to 400 products /minute
  • Easy care and cleaning due to compact, open and modular design
  • Efficient quick conveyor belt change system: Belt change within only two minutes

Product images and technical information could deviate and may not be available in your country.

An additional advantage: The device detects product defects such as cracks or air pockets in tubes and tins.

Benefit from precise results in real time and at high processing rates: Up to 400 packages/min. or 250 packages/min. for deep-draw packages are possible.

Higher Level Compliance package

Specifications Facts Details
Conveyor belt width/CBW 360 mm
610 mm
610 mm
XRE-D 300/150
XRE-D 400/250
XRE-D 450/200
Max. inspection height 150 mm
250 mm
200 mm
XRE-D 300/150
XRE-D 400/250
XRE-D 450/200
Max. inspection width 300 mm
400 mm
450 mm
XRE-D 300/150
XRE-D 400/250
XRE-D 450/200
Conveyor belt height 900 ± 50 mm
800 ± 50 mm
750 ± 50 mm
For all types
XRE-D 300/150, XRE-D 450/200
XRE-D 400/250
Installation length 1,400 mm For all types w/o rejection device
Max. load 15 kg For all types w/o rejection device
Product features Packaged or firm consistency No open liquids
Product temperature -20 °C to +80 °C
Matching products