Product Compliance
Environmental protection is down to both management and employees
Environmental protection is a fundamental management task. All supervisors and staff members therefore work conscientiously towards the daily implementation of environmental protection measures. Training and motivation for environmentally-aware activity are a central element of Bizerba’s environmental policy, and are documented in an annual report by the designated environment officer.
Laws, standards and guidelines
Bizerba is commited to adhering to appropriate and environmentally relevant laws, standards and guidelines. This is why the company works with authorities, institutions and qualified partners on an on-going basis. We review our environmental objectives and program at regular intervals and inform staff about our activities. We are thus also committed to reporting on our environmental management at works meetings and works council meetings..
Obligation to customers, staff and interested parties
Bizerba has set itself the objective of giving all customers the certainty that they are purchasing an environmentally sound product. This includes adhesion to environmentally-oriented procedures and processes within the company. We also provide regular information about environmentally specific aspects of our products with regard to handling, use, returns, recycling and disposal.
Environmentally-oriented products and processes
The aim of Bizerba’s environmental management system is the continuous improvement of operational environmental protection. In our product development and introduction of new production processes, we consider both materials and methods. We examine the entire product life-cycle from commercial and ecological points of view. Our organisational and technical measures, including specific emergency planning, are based on the best available technology in this regard.
Saving resources, avoiding waste and emissions
TBoth with product development and production, as well as in the definition and evaluation of the entire infrastructure, Bizerba places great emphasis on minimising its use of energy, raw materials and other natural resources. We reduce waste, residues, emissions, noise pollution, waste water and other environmental stresses to an absolute minimum or avoid them entirely where possible.
REACH
Registration, Evaluation, Authorization and Restriction of Chemicals according to Regulation (EC) No. 1907/2006 (REACH = Registration, Evaluation and Authorization of Chemical Substances).
The Regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) has been in force in the European Union since 2007 and aims to ensure the highest possible level of protection for human health and the environment.
According to Article 33, manufacturers of products must inform their customers if one or more substances on the candidate list (SVHC substance = Substances of very high concern) are present in a concentration of more than 0.1% (w/w). This list is regularly supplemented and updated by the ECHA (European Chemicals Agency) with additional substances.
According to our current state of knowledge and based on information from our suppliers, Bizerba products may contain components in which the following SVHC substances may be present in concentrations greater than 0.1%:
When used as intended, there is no danger to health or the environment.
Should you require further details, please contact the following e-mail address: product.compliance@bizerba.com
List of possible SVHC substances in Bizerba products:
- lead (CAS number: 7439-92-1)
- 4,4'-isopropylidenediphenol (CAS number: 80-05-7)
- octamethylcyclotetrasiloxane (CAS number: 556-67-2)
- lead chromate molybdate sulfate red (CAS number: 12656-85-8)
- lead sulfochromate yellow (CAS number: 1344-37-2)
- boric acid (CAS number: 10043-35-3)
- lead monoxide (lead oxide) (CAS number: 1317-36-8)
- diboron trioxide (CAS number: 1303-86-2)
- 1,3,5-tris(oxiran-2-ylmethyl)-1,3,5-triazinane-2,4,6-trione (TGIC) (CAS number: 2451-62-9)
- phenolphthalein (CAS number: 77-09-8)
- 1,2-dimethoxyethanes; ethylene glycol dimethyl ether (EGDME) (CAS number: 110-71-4)
- dodecamethylcyclohexasiloxanes (CAS number: 540-97-6)
- lead titanium trioxide (CAS number: 12060-00-3)
- disodium tetraborate, anhydrous (CAS number: 12179-04-3, 1303-96-4, 1330-43-4)
- tetraboron disodium heptaoxide, hydrate (12267-73-1)
Information on the disposal of old electrical equipment (WEEE)
Most of our equipment is within the scope of the WEEE directive. In order to ensure that your Bizerba products are recycled in an environmentally friendly manner, you as a customer return the device to Bizerba or our service partner after the end of its intended use. The Bizerba company and its dealers are of course prepared to take back the device that is no longer in operation free of charge. In this case please contact your responsible Bizerba contact person.
Environmental protection is down to both management and employees
Environmental protection is a fundamental management task. All supervisors and staff members therefore work conscientiously towards the daily implementation of environmental protection measures. Training and motivation for environmentally-aware activity are a central element of Bizerba’s environmental policy, and are documented in an annual report by the designated environment officer.
Laws, standards and guidelines
Bizerba is commited to adhering to appropriate and environmentally relevant laws, standards and guidelines. This is why the company works with authorities, institutions and qualified partners on an on-going basis. We review our environmental objectives and program at regular intervals and inform staff about our activities. We are thus also committed to reporting on our environmental management at works meetings and works council meetings.
Obligation to customers, staff and interested parties
Bizerba has set itself the objective of giving all customers the certainty that they are purchasing an environmentally sound product. This includes adhesion to environmentally-oriented procedures and processes within the company. We also provide regular information about environmentally specific aspects of our products with regard to handling, use, returns, recycling and disposal.
Environmentally-oriented products and processes
The aim of Bizerba’s environmental management system is the continuous improvement of operational environmental protection. In our product development and introduction of new production processes, we consider both materials and methods. We examine the entire product life-cycle from commercial and ecological points of view. Our organisational and technical measures, including specific emergency planning, are based on the best available technology in this regard.
Saving resources, avoiding waste and emissions
Both with product development and production, as well as in the definition and evaluation of the entire infrastructure, Bizerba places great emphasis on minimising its use of energy, raw materials and other natural resources. We reduce waste, residues, emissions, noise pollution, waste water and other environmental stresses to an absolute minimum or avoid them entirely where possible.
Your message is on it's way
The form was sent successfully
Oops, something went wrong here
An error occurred when sending the form. Please try again